WireGuard VPS · Private VPN
Run your own WireGuard VPN server.
A FlashRDP WireGuard VPS is a Debian or Ubuntu KVM server with full root access and a dedicated IPv4 address, for a private WireGuard VPN that connects your own devices and team. Plans start at $11.99/month in Phoenix, AZ or Paris, France.
What a WireGuard server needs
WireGuard is part of the Linux kernel, so the server needs its own kernel, one open UDP port and enough monthly transfer for everything your devices send through it.
| Need | WireGuard | FlashRDP Linux VPS |
|---|---|---|
| Kernel | Built into the Linux kernel since version 5.6 | KVM runs your own kernel; Debian 12/13 and Ubuntu 24.04 include WireGuard |
| Network | One UDP port, 51820 by convention | Dedicated IPv4 and a 1 Gbps port |
| Traffic | Everything your devices send passes through the server | 1,000 GB a month at full speed, then 512 Kbps until the 1st of the next month |
| Clients | Official apps for Windows, macOS, iOS, Android and Linux | One [Peer] block per device on the server |
| Access | Root to install wireguard and edit /etc/wireguard | Full root over SSH |
Pick a plan by what else you run
Every plan has the same port and monthly transfer, so the plan depends on what you run beside the VPN.
Personal VPN
BRONZE
2 vCPU · 4 GB RAM · from $11.99/mo
Your laptop and phone on one private tunnel.
VPN plus self-hosted apps
SILVER
4 vCPU · 8 GB RAM · from $22.39/mo
WireGuard beside DNS filtering or other services in Docker.
Team gateway
GOLD
6 vCPU · 16 GB RAM · from $35.99/mo
A shared private network for a small team's devices and services.
Every plan is the same price in Phoenix and Paris. See the full Linux VPS plan range and the fair bandwidth policy.
A minimal server config
This is the heart of /etc/wireguard/wg0.conf: the server's tunnel address and port, and one [Peer] block per device. Start it with systemctl enable --now wg-quick@wg0.
The full WireGuard guide covers key generation, NAT forwarding rules, IP forwarding, client configs and adding devices without dropping connections.
For private use only: the Acceptable Use Policy prohibits public VPN services and open proxies.
[Interface]
Address = 10.8.0.1/24
ListenPort = 51820
PrivateKey = <server private key>
[Peer]
# laptop
PublicKey = <laptop public key>
AllowedIPs = 10.8.0.2/32From order to your first connected device
- 1. OrderChoose Debian 12/13 or Ubuntu 24.04 at checkout; pay by crypto or card.
- 2. Install WireGuardSSH in as root and run apt install wireguard.
- 3. Configure wg0Generate keys, write /etc/wireguard/wg0.conf and enable IP forwarding.
- 4. Connect a deviceImport the client config into the WireGuard app and turn the tunnel on.
Related: Debian VPS, Ubuntu VPS, Docker VPS and SSH access guide.
WireGuard VPS questions
Is running my own VPN allowed?
Yes, for your own devices and team. FlashRDP's Acceptable Use Policy prohibits open or public proxies, public VPN services and Tor exit nodes, so don't sell VPN access or share it publicly.
How much traffic can I send through it?
Every server has a 1 Gbps port with 1,000 GB of monthly transfer at full speed. After 1,000 GB the port is limited to 512 Kbps until the 1st of the next month, and more transfer can be bought by ticket. Everything your devices send through the VPN counts toward it.
Will WireGuard work on a FlashRDP server?
Yes. FlashRDP servers are KVM virtual machines with their own kernel, and Debian 12/13 and Ubuntu 24.04 kernels include WireGuard. Install the tools with apt install wireguard.
Which IP address will my traffic show?
The server's dedicated IPv4: Phoenix, Arizona (USA) or Paris, France, depending on the location you pick.
How many devices can I connect?
WireGuard has no fixed device limit. Add one [Peer] block per device with its own address; the 10.8.0.0/24 network in the guide leaves room for over 250 devices.
Can I route only some traffic through it?
Yes. Set AllowedIPs in the device's config to 0.0.0.0/0 to send everything through the VPN, or to 10.8.0.0/24 to reach only services on the server.
Your own VPN, on your own server.
Debian or Ubuntu on KVM with full root, a dedicated IPv4 and a 1 Gbps port, from $11.99 a month.
Last reviewed October 13, 2026 by the FlashRDP Editorial Team.